Jsa Roof DOC
Roof sheeting and materials could be dislodged during and while awaiting removal. ... Completing the Job Safety Analysis (JSA) Identify the hazards or potential incident and determine if you can implement the recommended controls.
Job Safety Analysis – Roof Sheeting . JSA No: Date: Job and Location: Assessment conducted by: Hazard ... Completing the Job Safety Analysis (JSA) Identify the hazards or potential incident and determine if you can implement the recommended controls.
Extension ladders must extend at least 3 feet above a roof or landing. Never use extension ladders to ... presence on campus. Date: July 1, 1991 / Analysis By: Clarice Bettencourt / Reviewed By: Pete Sorrell *Note: This Job Safety Analysis form includes the following positions in the ...
ROOF WORK - Have Competent Persons been designated and documented on form S-AF-083 in accordance with practice ASP.653.1000? Has a Roof Access Permit (form S-AF-465 or equivalent) been completed? ... Job Safety Analysis (JSA) ...
Unprotected sides and edges, including ramps, runways, and other elevated walking/working surfaces, excavations, roof work; b. Leading edges, including formwork and reinforcing steel; c. Bucket trucks or aerial lifts; d.
Company: (Name, Contact Person & Phone) Project/Site: Principal Contractor: Job Task: Timber Roof Truss Installation SWMS No.: Date Created: Revision Number: Review Date:
JOB SAFETY ANALYSIS JOB TITLE: CHANGE FILTERS IN AIR HANDLERS – RTU-2. JSA No. 7000-001. PAGE 1 OF 4 DATE:01 ... Units located on roof of various County Facilities Department: Facilities Management Reviewed By: James Tonda – Safety Manager. Sequence of Basic Job Steps: Potential Hazards ...
JOB HAZARD ANALYSIS - CHC Example. Job Operation. Install an Exhaust Fan on the roof of a building Department . HVAC Technical Service. Supervisor. Harry Best, Operations Foreman
SWMS/JSA Sign off and acceptance of proposed work method and associated responsibilities No ... Never operate tipper above the OTP (optimum tip point) base of tipper headwall level with roof of cab. All personnel to remain in operators field of view at all times.
Has a Roof Access Permit (form S-AF-465 or equivalent) been completed? Has a Good Faith Roof Assessment been performed within a year and documented and signed on form S AF-084 or equivalent? ... Job Safety Analysis (JSA) ...
Company: (Name, Contact Person & Phone) Project/Site: Principal Contractor: Job Task: Roof Tiles SWMS No.: Date Created: Revision Number: Review Date:
Title: Job Hazard Analysis - Form 1 – page 1 Last modified by: Jennifer Smith Created Date: 7/26/2007 8:37:00 PM Company: nps Other titles: Job Hazard Analysis - Form 1 – page 1
Job Safety Analysis: Step Description Hazard Controls 1 Climb ladder up to roof to inspect area of work Fall, electrocution Follow established procedures detailed in JHA #10 "Ladder Safety" 3 Transport tools & materials to roof.
Ladders should extend 3 feet above roof if climbing to the roof. ... 1991 / Analysis By: Rich Haro, Clarice Bettencourt *Note: This Job Safety Analysis form includes the following positions in the Los Rios Community College District: Instructor – Construction; Instructor – Drafting ...
CRAFT-SPECIFIC JOB SAFETY ANALYSIS (JSA) Date: Contracted In (Alcoa Employees) Contracted Out (Contractor Employees) Contractor Name: Plant ... Hot Work ( ( ASP.653.2308 6. Roof Work ( ( ASP.653.2321 7. Fall Hazards (> 6ft) ( ( ASP.653.2001 8. Excavation /Trenching ( ( ASP.653 ...
Roof Work ..... 40. Residential Construction ..... 41 . Fire Prevention ..... 41 . Fire Extinguishers ... Job Hazard Analysis (JHA) or Job Safety Analysis (JSA) ..... 65. ...
JOB SAFETY ANALYSIS Job Task: Entering and Exiting a Car-Version 1 Date: Analysis Performed By: ... (Do not place anything on roof) 2. Entering the car (step 2). Slipping and falling injury . Damage to other vehicle or own . Hurt back, arms, or legs.
Non hazardous confined spaces are floating roof tank tops, tower skirts, sunken valve and pump manifold areas, cooling tower cells, and fin fans. ... Check JSA Completed box if a Formal (written) Job Safety Analysis is done.
JSA Reviews; Mine Specific Ground Control Plan ... 1 Perform work area examination 2 Observe roof and rib conditions Locating and fixing loose scale on roof and rib can prevent equipment damage and injury. 2 Exposed trailing cables Contact with exposed trailing cables can lead to ...
Supplemental Task-oriented JSAs (Job Safety Analysis) should be used in conjunction with the ATW. A copy of this completed form must be provided to the BP USPL Representative, ... Remove existing floating roof seals. Demo existing floating roof.
Into FEH hutch roof concrete radiation shielding, with penetration exceeding 3 inches deep. ... Work Planning and Control: Job Safety Analysis Form (SLAC-I-730-0A21J-034) (pdf or Word); see “Job Safety Analysis” for additional guidance.
(See the sample Job Safety Analysis form attached to this document.) 4. ... _____ Roof eave height: _____ Perimeter edge: _____ Roof perimeter dimensions: _____ Other fall hazards in the work area ...
Also covered are a set of guide lines regarding on site Job safety analysis (JSA) and a sample form to assist staff in knowing when, where and how to use a JSA . Safe Work Methods ... (install aerials on pit roof or setup horn string on lawn).
Job Safety Analysis: Step Description Hazard Controls 1 Removal of filters Cuts, burns Gloves, goggles, overalls, hard hats. ... 6 Roof work Within 6 feet of edge, safety harness lanyard on to life line anchor or other security.
Ensure appropriate staff are trained and competent in height or roof safety including use of roof safety systems, ... JSA or other safety risk assessment and plan is provided to the QUT Permit Officer (above) before seeking a roof access permit.
Roof surface is set out, sarked, boarded and battened as required by job specifications. 2.4. ... job safety analysis (JSA) and safe work method statements. material safety data sheets (MSDS) materials storage and environmentally friendly waste management.
job safety analysis (JSA) and safe work method statements. material safety data sheets (MSDS) ... roof truss materials and installation, including fire control and separation materials required by the National Construction Code (NCC) and other legislation.
5. Roof Work PRC-PRO-SH-40112 ... JSA/AHA) Date: Project No.: Task Order/Contract No.: Work Activity. Hazards Present. Required Safety Measures/PPE ...
implications of climate variations for the design of roof draining components. job safety analysis (JSA) and safe work method statements (SWMS) levelling and alignment processes. process of planning, sizing and documenting the layout of roof drainage systems.
CHPRC JOB HAZARD ANALYSIS/ ACTIVITY. HAZARD ANALYSIS . FOR SUBCONTRACTORS (JSA/ A. HA) Date: Project No.: Task Order/Contract No.:
removal of dumpsters from the roof. lifting and/or moving equipment / materials directly overhead of site personnel . personnel are not permitted to work under the load being lifted or moved. ... Job Hazard Analysis (JHA) or Job Safety Analysis (JSA)
Job Safety Analysis (JSA) ... Ladders must extend three feet above landing on roof for proper use. Defective ladders must be properly tagged and removed from service. Keep ladder bases free of debris, hoses, wires, materials, etc.
Job Safety Analysis (JSA) is a technique to identify the health and safety hazards of specific tasks in order to reduce the risk of injury to workers. ... Examples: Crawl spaces, roof areas, sewer systems. Check OH&S legislation, Part XVIII.
Install roof components. Competency No. BCPRF3004A. Assessment task plan: ... Complete a job safety analysis (JSA) and list OH&S requirements *(AP) Plan the task. Select appropriate tools and equipment. Generate material list (if relevant) Plan sequence of work.
This includes the crane operator, assistants on the ground and workers accepting the load on the roof. ... In the event of a mishap, a Job Safety Analysis shall be conducted by Robert Meyers using the guidelines below:
Roof Control Plan. Lock Out/Tag Out Procedures. Proper Lifting Procedures. Company Policies. MSHA and State Regulations. ... 1 Company policy Enter the mine by elevator 1 Get on mantrip 1 Ensure mantrip has been pre-op’d (follow JSA) ...
If “Yes” details are required in the RA/JSA ( Yes ( No ( N/A. Working on the Roof. Are work positioning or fall arrest systems in place where the roof is steeply pitched (> 1 in 6 or 15 degrees)? ( Yes (
Collapsing roof/equipment. Elevated/Uneven work surface. Open holes. Other: Motion. Vehicle/Equipment movement. ... Job Safety Analysis. Electrical Lock-Out/Tag-Out. Land Transportation Safety. Electrical Safety. Lifeboat Safety. Emergency Evacuation (Drills, Muster Points)
A Safe Work Method Statement (SWMS), Job Safety Analysis (JSA) and/or Safe Work Procedure (SWP) ... Roof and/or ladder anchor points. Ropes and harness. Step ladder. Extension ladder. Edge protection. Mobile scaffold. Appropriate footwear. Safety net.
Inspection of roof primary & secondary seal, roof rim vent, roof foam dam, and fire fighting system for the Tank under operation. Maintenance and overhauling inspection of foam chambers. Inspection of breather and vacuum breaker valves during shot down.
... 1. new miner material, and 2. changes in procedures, if any. Lecture, discussion Company documents Roof or ground control and ventilation plans [48.8(b)(4 ... discussion Company accident reports, MSHA data, JSA Self-rescue devices and respiratory devices [48.8(b)(8)] (20 min ...
Here is a recent case reported by Jewelers’ Security Alliance (JSA, www.jewelerssecurity.org). SUSPECTS SMASH CASES WITH HAMMERS, ... Sometimes burglars gain access to a jewelry store by cutting a hole in the roof or in a common wall shared with an adjacent business.
chprc craft-specific job safety analysis/ position hazard analysis (k-1 jsa/pha) date: ... 5. roof work 14. asbestos ...
JSA filled out before start of the work? ... Floor/Roof/Wall openings? Tanks/Trenches/Excavations/Pits/Ditches? Ladders/Safe Access Ladders correctly placed/secured? Ladder condition/construction? Adequate access ramps and walkways?
JSA -Job Safety Analysis, CHAT and PPE-Personal Protective Equipment: The main purpose of our JSA (Job Safety Analysis) ... Warning Line System: A barrier erected on a roof to warn employees that they are approaching an unprotected roof, ...
Knowledge of processes of flashing roof and wall penetrations. ... Knowledge of job safety analysis (JSA) and safe work method statements. Knowledge of relevant safety manuals and instructions of tools and equipment Under supervision.
... Time shift ended Date/time reported to OMSL Reported by Type of accident Roof Fall Machinery Electrical Haulage Explosives Other Brief description of accident (incl. injured body part ... JSA#: District EB-83 (revised 08/24/2011) Author: Deb Hamblin Last modified ...
JSA SCHOOL COUNCIL GENERAL MEETING. Date: 31st October 2013 Time: 5.30pm. Location: JSA - Professional Learning Centre. Chairperson: Steve Shennan . Minutes: Marnie Stilo. ... Have had some roof leakages in the main/admin building.
Provide preservative treated materials for material used outside building, in roof, parapets and below grade.. Preserve; Chemical Specialties, Inc. Treated lumber standard: AWPA C-2. Treated plywood standard: AWPA C-9. Preservative treatment standard: AWPA ACQ-94.
Job Safety Analysis (JSA) is needed ( BNL Hazard Categorization Screening Report is . needed *Also, check off in Section B. ... Adding/Removing Walls or Roof - Work affects the integrity of a structure. Contact your ES&H subject matter expert.