Advances in the Analysis and Design of Marine Structures

cover
Half Title
Series Page
Title Page
Copyright Page
Table of Contents
Preface
Organisation
Acknowledgements
Methods and tools for loads and load effects Hull girder loads
Verification of onboard loading computer by laser measurements
Assessment of loads on a ship hull during a sideways launching process based on model tests
Hull structural loads during a sideways launching process using fluid-structure interaction
Study on fatigue design loads based on actual encountered loads
Wave loads
Update of wave statistics standards for classification rules
Different strategies to improve isochrone voyage optimization algorithm
Estimation of nonlinear forces acting on floating bodies using machine learning
Comparative study of ship design load on various environmental conditions
On nonlinear wave loads of a mega-scale container ship using an elastic backbone model
Encounter spectra computation of heave motion based on full-scale measurements using ANN
Data-driven ship fatigue assessment based on pitch and heave motions
Numerical simulation of ship motion and non-linear sea loads of a modern frigate in regular waves
Slamming
Abnormal wave slamming impact of stiffened cylinders
Comparison between deforming meshes and overset meshes for water entry of a wedge
Experimental investigation on oblique entry of trimaran cross deck structure
Fluid-structure interaction analysis for bow-shaped structure subjected to slamming pressure
Dynamics and vibration
Motion analysis of a floating horizontal set of interconnected plates based on computer vision target tracking technique
Wind-induced vibration characteristics of typical guide rail frame structure in open area of large cruise ships
Wind-induced vibration characteristics of typical guide rail frame structure in open area of large cruise ships
Model test of a dual-spar floating wind farm in regular waves
Acoustic black holes: The new frontier for soundproofing on board ships
Wave energy
Experimental study on inflatable circular diaphragms used in the oscillating water column wave energy converter
Power capture performance analysis of a 2DoF nonlinear wave energy converter in regular waves
Fatigue of mooring lines in wave energy parks
Two-body, time domain model for a heaving point absorber
Wind turbine
Implied safety level in design codes for monopile offshore wind turbines - parametric study on the effect of partial safety factors
Experimental study of long-term scour damage for protected offshore wind foundations
Design of substructure of 10MW floating offshore wind turbine system based on dominant load parameters
Mooring system optimization of 12MW FOWT in environment condition in the southwest sea of Korea
Methods and tools for strength assessment Structural analysis
Hydroelastic response of a moored floating flexible structure based on Timoshenko-Mindlin beam theory
Hull deflection estimation model for marine shaft alignment applications
A study on the development of a FPSO standard model (KRISO-FPSO) I: Focusing on structural safety evaluation
Numerical analysis of the Ro-Ro vehicle ramp structure under moving load
Finite element analysis for ship production solutions
A mathematical model for variable cross-section hull girder withtime-varying mass characteristics
A method for fast calculation of vertical bending moment and stress distribution of hull structure in HMS system
Structure analysis of lightweight sail structures for wind-assisted ship propulsion
Ultimate strength
Rule formulation updates on buckling strength requirements in Common Structural Rules
Equivalent single layer approach for predicting ultimate strength of stiffened panel under different load combinations
Study on the modification and application of RTCL criterion considering the influence of mesh size
The ultimate strength of sandwich plates with joints under in-plane compression
Ultimate strength – hull girder
Hull girder ultimate strength assessment according to rules requirements
Hull girder collapse analysis in extreme wave by direct coupled simulation between CFD and FEM
Predicting ship’s ultimate longitudinal strength considering the lateral pressure loading
Ultimate strength – cyclic load
Evaluation of residual plastic strain on a stiffened panel subjected to compression and tension-compression cyclic load
FEM numerical strategies for the evaluation of the accumulated plastic strain due to a cyclic load condition
Response of plates and stiffened panels under pressure and cyclic biaxial loading
Collapse response analysis of a ship’s hull girder in cyclic focused waves using a hydro-elasto-plastic beam model
Fatigue
Consequence and uncertainty-informed fatigue life prediction of ships
Fatigue performance of aluminum alloy EN-AW 5083 cut edges producedby abrasive water jet and laser cutting
Structural life expectancy assessment of an aging combatant ship using spectral fatigue analyses
Fatigue testing of multiaxial non-proportionally loaded T-nodes
A study on the development of a FPSO standard model (KRISO-FPSO) II:Focusing on fatigue assessment
Predicting failure of dynamic subsea cables by electrical insulation breakdown due to water treeing
On the application of Engineering Critical Assessment specified in BS 7910 to ship structures
Numerical analysis of pit-to-crack transition under corrosion fatigue using a stochastic pit generation algorithm
Wind turbine – fatigue
The effects of surge underprediction on fatigue damage of floating offshore wind turbine dynamic cables
Tension angle assessment of mooring chain of a 10MW floating offshore wind turbine
Fatigue assessment of offshore wind turbine support structures subjected to seawater
Impact of preload loss on fatigue strength of blade root bolts of a Floating Offshore Wind Turbine (FOWT)
Offshore structures
Predicting long-term extreme responses using two approaches with a case study of a jacket structure
Experimental study on the lateral bending capacity of steel pipes with initialdents
Collapse and burst analysis for a subsea sandwich pipe
Stress distribution in uniplanar KT joints reinforced with fibre reinforcedpolymer subjected to the axial loadings
Ice
Application of the CASFOP taxonomy to analyse an ice incursion incident with a FPSO
Fluid-structure interaction simulations using a hydrodynamic plug-in HydroQus
A rate and pressure dependent elastoplastic material model for glacial ice colliding with marine structures
Study on the annual changing trend of Arctic Sea ice melting for merchant shipping
Impact
Experimental investigation of the repeated impact behaviour of rectangular plates
Crashworthiness analysis of semi-submersible platform column subjected to ship impact loads
Shape characterization and impact on the structural behavior of initially distorted, 4-mm thick ship-deck stiffened panels
Analysis of how the conditions in a collision scenario affect the size of a struck vessel’s damage opening and ultimate strength
Blast and explosion
Prediction of damage extents due to in-compartment explosions in warships
Anti-blast performance optimization design of corrugated sandwich structures based on BP-GA method
Time delay effect in the dynamic response of submerged cylinder subjected to an underwater explosion
Recent studies on the saturated impulse for ship structures under pressurepulse loading
Experimental analysis of structures Composites
Finite element analysis of filament wound composite materials split disk tests
Experimental and numerical study of composite materials drive shafts
Thermal and rheological study of structural adhesives for naval construction
Experimental analysis of ballistic impact on carbon, glass and hybrid composite under hydrostatic prestrain
Materials and fabrication of structures Corrosion
The integrity of corrosion protection systems of welded maritime structures under cyclic loading
Microstructural analysis of intergranular stress corrosion cracking in 5xxxseries aluminum reinforced with a composite patch
Uncertainty quantification within strain-based SHM schemes used for detecting thickness loss in ship hulls
Corrosion degradation impact on mechanical properties of structural steel
Methods and tools for structural design and optimization Ship design
Integration of a tank storage solution for alternative fuels on a RoRo ship
On the safety of offshore mooring systems
Experimental study on structure responses of triple wing sails to turbulence flows at multiple apparent wind angles
Numerical and experimental analysis of fire resistance for bulkhead and deck structures of ships and offshore installations
Ship design and optimization
Comparison of metaheuristic algorithms and constraint handling approaches for multi-objective optimization of a tanker
Structural optimization of cell guides for container securing as a retrofit solution on barges
Ship design optimization considering probabilistic compliance of decarbonization regulations
Lightweight design and topology optimization of marine structures using peridynamics
Structural reliability, safety and environmental protection Reliability
Review of the structural configuration and strength of metallic sandwich panels
Analysis of pontoon primary structure failure
Pontoon design and construction methodology of gangway
Significance of laser weld stiffness in vibration and buckling optimization of laser-welded web-core sandwich panels
A Bayesian approach for the quantification of strength model uncertainty factor in ultimate limit state
Structural reliability analysis of secondary hull detail
Concept of the probability-based ship operability analysis
Bayesian inference for the parameters of probabilistic corrosion model adopted by IACS
Author Index